Crush Guard - Spares - Part Numbers

When ordering from EQSS quote part number below:

• Related Articles

• Crush Guard - Install - Wiring Diagram

  The wiring diagram for the Crush Guard® is shown below:

• Crush Guard - User - Troubleshooting

  This section describes how to identify and solve common problems that may occur while operating the EWP with the Crush Guard®.

• Crush Guard - User - Crush Guard Reset Procedure

  When the Crush Guard® alarm is triggered Follow the steps below to reset the system: 1. Ensure the magnet is attached, as shown in picture - highlight circle 1 2. Press the Reset button to disable the alarm and return to normal operation - highlight ...

• Crush Guard - Mechanical - Maintenance

  The components of the Crush Guard® require periodic checks and maintenance to be performed to ensure it remains in good working order. Clean the Magnetic Anchor The magnetic anchor can accumulate metallic debris. If too much debris accumulates around ...

• Crush Guard - Faults - Fault Codes

  When a error with the Crush Guard® occurs the Fault light will flash on the user interface. The fault flashes a numbered sequence based on the type of error. The type of fault flash codes are: • One Flash – Indicates a configuration problem. Most ...