Gen1 - User - Attachment Identification

The TSS is able to determine the current attachment using an ID reader located on the quick release and ID tags located on the attachments.

This means attachments can be quickly and easily exchanged without having to connect anything at the end of the boom.

Picking Up An Attachment

The following procedures outline what should happen when picking up a new attachment.

​

• Related Articles

• Gen3 - Attachments - Manual Attachment Selection

  The attachment selection menu is accessible by pressing the - User Input Control dial to enter the Menu System Then select 'Attachment Selection Menu' This will display a list of the currently calibrated attachments for this Telehandler (as below ...

• Gen3 - Attachments - Attachment Automatic Recognition

  When the Gen-3 system is configured for automatic tool selection, the system will read the identification tag on the attachment and automatically change the system to the matching attachment. If the attachment has multiple configurations (e.g. ...

• Gen4 - Attachments - Attachment Menu

  The attachment selection menu is accessible by pressing the change attachment button in the bottom right corner on the attachment description on the main screen. The change attachment button is highlighted below. Once the new attachment is selected ...

• Gen3 - Attachments - Attachment Automatic Recognition Installation

  When installed, the system will read the identification tag on the attachment and automatically change the system to match that attachment. Connection Layout RFID Cable Reeler Installation RFID Reader Installation RFID Tag Installation

• Gen3 - Hardware - Incorrect Reading when Attachment Tilted

  The Gen 3 LMS system was never designed to be a weight measuring system but rather, it is a weight monitoring system, intended to create safety cutouts when the machine on which it is mounted, is pushed beyond safety limits. When using any ...