Gen3 - Software - Gen 3.5 Display creating UHF CB Radio interference
It has been found that the Gen 3.5 display can interfere with the reception of nearby installed UHF CB radios
The cause of this interference stems from the power levels of the actual Display LCD.
EQSS solved this interference via a Gen 3 display software update by applying a minor change to the LCD power output parameters.
If you are experiencing interference on your CB radio channels, then please fill out an EQSS Support Ticket and we will then advise you further on how to apply a software update.
Related Articles
Gen3 - Software - Commission Spare Display
A spare display must be updated with the model specific configuration files before it can be used with an existing Gen3-LMS system. If the existing display is available swap over the SD card from the spare display. This will ensure that the sensor ...Gen3 - Software - EQSS Gen 3 Configuration Tool
All end user capable configuration tasks are accomplished using the EQSS Gen 3 Configuration Tool The EQSS Gen 3 Configuration Tool is part of, and is automatically downloaded when the EQSS software suite is downloaded. The EQSS: Gen 3 Configuration ...Gen3_ITC - Software - EQSS Gen 3 Configuration Tool
All end user capable configuration tasks are accomplished using the EQSS Gen 3 Configuration Tool The EQSS Gen 3 Configuration Tool is part of, and is automatically downloaded when the EQSS software suite is downloaded. The EQSS: Gen 3 Configuration ...Gen3 - Selections - Disable/Enable Forward/Reverse Camera (Old Display Software)
Enabling/disabling cameras in older Gen 3 display software can be done by directly editing a configuration file on the SD card Enabling/Disabling cameras in older display software versions requires a PC/Laptop, an SD card reader and the Windows ...Gen3 - Software - Update Telehandler Display Software
These instructions apply for updating Gen3-LMS systems installed on Telehandlers. This update should not be applied to Gen3-LMS systems installed on ITCs or other machinery. To update the Gen3-LMS for ITC machines see the related Knowledge Base ...