OverWatch - General - OverWatch for Haulotte Optimum 8 (Opti) and Compact models
Since May 2021 EQSS supplies a modified OverWatch kit to Haulotte for installation onto the
Optimum 8 (Opti) and Compact models.
This modified kit is internally identified as ‘EVO’, it may be referenced by Haulotte as SGS.
Externally it may be mistakenly called OverWatch by rental and construction companies.
Note that EQSS still supplies the OverWatch kit for retrofitting onto the same models. Thus there are
some Haulotte Compacts and Optis with OverWatch and some with EVO.
For all sales and support it is important to identify if it is OverWatch or EVO.
The EVO kit is comprised of:
- A CAN R3V1 ECU
- An R3V1 sensor
Please note that there are 3 types of R3V1 ECUs, namely Digital, Hybrid and CAN. This one is the CAN type.
The mounting bracket and wiring harness is supplied by Haulotte.
The EVO connects to the scissorlift via CAN, using Haulotte coded software.
NOTE The OverWatch R2V3 software is not compatible with the EVO. The standard method of accessing the WiFi by swiping over the sensor on startup doesn't exist for this ECU. Software maintenance is managed entirely by the Haulotte ECU as described in the Haulotte EVO manual.
Related Articles
OverWatch - General - What is EQSS Overwatch and how does it work?
Principle of Operation The OverWatch™ is an innovative system designed as a safety aid to the operator. The system does not replace operator training. The system works on the premise of detecting the operator’s position and movements, with respect to ...OverWatch - Hardware - Haulotte SGS is different from EQSS Overwatch
The Haulotte SGS (Secondary Guarding System) is a Haulotte exclusive system and is manufactured by EQSS - but installed within the Haulotte factory by Haulotte. It can only be used on the Haulotte Hybrid Compact AE series EWPs. The SGS system uses ...OverWatch - Installation - Haulotte HSxxE Harness Soldering
As part of the kit installation process, the Overwatch Haulotte harness requires some soldering This Tech Doc was not written as a step by step installation guide, but rather further guidance whilst following the actual published pdf installation ...OverWatch - Installation - Haulotte DX Pre 2010 Harness Soldering
As part of the kit installation process, the Overwatch Haulotte DX Pre 2010 harness requires splicing and soldering This Tech Doc was not written as a step by step installation guide, but rather further guidance whilst following the actual published ...OverWatch - Software - Hybrid Overwatch ECU Module
Some Overwatch Kits contain a Hybrid ECU module and are NOT compatible with standard 6253 Overwatch software The Skyjack SJ12/16/20 - E series, some LGMG EWP machines, some Haulotte EWP machines are equipped with an Overwatch Hybrid system and ...