OverWatch - User - Elevate Mode

OverWatch - User - Elevate Mode

The OverWatch Version 9 will apply the cutout when the machine mode is Elevate according to the following table:


The OverWatch Version 8 will apply the cutout when the machine mode is Elevate according to the following table:



    • Related Articles

    • OverWatch - User - Session Auto Calibration

      The OverWatch starts sensing the operator from the time the platform’s dead-man trigger is pressed. How it works: When the machine is powered, and the system is functional, the operator will see a green light on the OverWatch sensor. This indicates ...
    • OverWatch - User - Crush Event Cutout

      The OverWatch™ is an aid to the operator and this system should not in any way replace operator training. The system relies on optical detection principals and may not work in all situations and environments. A normal crush event can occur when the ...
    • OverWatch - User - Quick Start Guide

      This quick start guide is specific to Overwatch Version 9 software
    • OverWatch - User - Overwatch EWP Safety in Industry (Software V9)

      This Tech Doc applies to: MEWP Operators, Site managers and supervisors, Ground staff What is EQSS Overwatch? The EQSS Overwatch is an Elevated Work Platform (EWP) operator monitoring and cutout type of crush protection system (sometimes called ...
    • OverWatch - General - What is EQSS Overwatch and how does it work?

      Principle of Operation The OverWatch™ is an innovative system designed as a safety aid to the operator, but it does not replace operator training. The system works by emitting a low power invisible LASER light. Then in real time, it detects the ...