OverWatch - User - OverWatch Inspection Checklist

OverWatch - User - OverWatch Inspection Checklist

It is recommended to complete an inspection of the EQSS OverWatch system as part of the MEWP pre-hire inspection and the periodic 3 monthly inspection.
The goal is to confirm the OverWatch is functioning correctly and is undamaged. This inspection is to be carried out by a competent technician who has the expertise and experience to safely operate the MEWP and evaluate the operation and condition of the OverWatch.

Select the image below to open in photo viewer (or similar), then print your own copy as needed.

    • Related Articles

    • OverWatch - User - Inspection & Maintenance

      Regular maintenance must be performed on the OverWatch™ components to ensure the system operates correctly. This maintenance must be performed every 12 months in a rental situation, or before the machine is released to the hire customer.

    • OverWatch - General - What is EQSS Overwatch and how does it work?

      Principle of Operation The OverWatch™ is an innovative system designed as an aid to the operator. The system does not replace operator training. The system works on the premise of detecting the operator’s position and movements, with respect to the ...

    • OverWatch - User - WiFi Access

      The OverWatch includes an embedded web server, accessible via Wi-Fi. The use of this interface is limited to viewing the system’s diagnostic information, performing routine tests on all inputs/outputs and accessing the time stamped log files. Minimum ...

    • MCL - User - Intro & Pre Operation Inspection

      Introduction The Maximum Capacity Limiter (MCL) is a cost effective solution to limit the capacity of jib and winch attachments to below 3 tonne to comply with AS1418.19-2007 Section 2.11. The MCL load sensor can be calibrated to any capacity so the ...

    • OverWatch - User - Session Calibration

      The OverWatch starts sensing the operator from the time the platform’s dead-man trigger is pressed. When the machine is powered, and the system is functional, the operator will see a green light on the OverWatch sensor. This indicates that the ...