SFPL - User - User Input Control

SFPL - User - User Input Control

The user control dial is used in order to access the menu to perform diagnostics.
To access the user control dial, release the two bolts holding the enclosure lid.
Slightly open the lid to control the user dial.


The user input control dial has 3 functions: Scroll Up, Scroll Down and Select.

Scroll Up – Rotating the dial clockwise performs a scroll up action which may depending of the current screen scroll up the user menu or zoom into the rating chart
Scroll Down – Rotating the dial counter-clockwise performs a scroll down which may either scroll down the user menu or zoom out of the rating chart
Select – Press and release the top of the dial to perform a select which is used to either select a menu option or to enter the menu system
When any of the user input control actions are performed the display will emit a short notification sound.


    • Related Articles

    • Gen3 - User - User Input Control

      The User Input Control mounting is Telehandler dependent and can be found in one of multiple locations within a cab. Below are some common mounting positions: The user input control switch has 3 functions: increment up, increment down and select. ...

    • Gen3_ITC - User - User Input Control

      The operator will be required to select different configuration options for the safety system, such as changing the attachment selection. This is accomplished by the user input control switch. The user input control switch has 3 functions: increment ...

    • SFPL - User - SFPL Menus

      The menu system allows for configuring and diagnosing the SFPL. To enter the menu system press the user control dial. This will display the main menu. To navigate through the menu options rotate the user control dial. The currently selected option ...

    • SFPL - User - Main Screen Layout

      All principle SFPL operating data is displayed on the EQSS SFPL main screen Status Description – This displays the current status of the SFPL. Range Chart – This shows the capable range of the main boom segment, the blue crosshair shows the current ...

    • Gen3 - Hardware - 5 Button User Control switch

      The 5 Button User Control switch must be plugged in to the Display for Gen 3 navigation to be possible 5 Button User Control switch assembly (Part No: SW001077) If you are not able to navigate the Gen 3 System then: 1. Check the physical connection ...