Gen3 - Software - Update Barminco ITC Display Software

There are two versions of the ITC software for the Gen3-LMS. These instructions will apply the software for the Barminco range of machines. For all other ITC machines follow the Universal software instructions here.

The following instructions will describe copying an update file to the Gen3-LMS SD card so that an update can be applied.

1. Remove the SD card from the Gen3 display and insert into the laptop
   Note: The Gen-3 Configuration Tool user manual here explains in more detail and shows how to remove the SD card from the display
2. Download the latest update.tar file from this link below
   https://drive.google.com/file/d/1JPiCT-6eBXnGD6K8fd094BwNhMszq146/view
   Please Note: To download the update file from google drive click on the download icon  in the top right corner
3. Copy the downloaded update.tar file to the SD card
   
4. If necessary rename the file update.tar, if it's named update (1).tar or something else the Gen3 will not recognise it as an update file and the update will not be applied
5. Click Safely Remove Hardware from the system tray to safely remove the SD card from the laptop
6. Insert the SD card into the Gen3 display
7. Start the engine to power the Gen3 LMS
8. The display will boot to the update screen, wait for the update to complete and reboot
   Note: If the display did not show the update screen before booting to the main screen, then the update file has been copied or named correctly, repeat from step 2

WARNING: In Step 4 If your web browser renames the update.tar file when downloading. You must rename the file back to update.tar or THE UPDATE WILL NOT WORK.

• Related Articles

• Gen3 - Software - Update Universal ITC Display Software

  There are two versions of the ITC software for the Gen3-LMS. These instructions will apply the Universal software. If the machine is owned by Barminco follow the instructions here. The following instructions will describe copying an update file to ...

• Gen3 - Software - Update Telehandler Display Software

  These instructions apply for updating Gen3-LMS systems installed on Telehandlers. This update should not be applied to Gen3-LMS systems installed on ITCs or other machinery. To update the Gen3-LMS for ITC machines see the related Knowledge Base ...

• Gen3 - Software - Commission Spare Display

  A spare display must be updated with the model specific configuration files before it can be used with an existing Gen3-LMS system. If the existing display is available swap over the SD card from the spare display. This will ensure that the sensor ...

• Gen3 - Software - Update Configuration and Load Calibration for Barminco

  Follow the instructions below to update the Gen3-LMS with the latest configuration and load calibrations. Remove the SD card from the Gen3 display and insert into a laptop Click on the links below that matches the machine Volvo L90H Volvo L120H Click ...

• Gen3_ITC - General - What is it GEN 3 ITC?

  This system has been designed specifically for use with Integrated Tool Carriers (ITC) to cover all relative national and international safety standards. This Tech Doc details system specifications, system functionality, installation requirements, ...