Gen3 - Software - Update Telehandler Display Software

These instructions apply for updating Gen3-LMS systems installed on Telehandlers. This update should not be applied to Gen3-LMS systems installed on ITCs or other machinery. To update the Gen3-LMS for ITC machines see the related Knowledge Base articles.

The following instructions will describe copying an update file to the Gen3-LMS SD card so that an update can be applied.

1. Remove the SD card from the Gen3 display and insert into the laptop
   Note: The Gen-3 Configuration Tool user manual here explains in more detail and shows how to remove the SD card from the display
2. Download the latest update.tar file from this link below
   https://drive.google.com/file/d/1-mkTfzYXBQbehlQl1hsgWIT2dcfORiOa/view
   Please Note: To download the update file from google drive click on the download icon  in the top right corner
3. Copy the downloaded update.tar file to the SD card
   
4. If necessary rename the file update.tar, if it's named update (1).tar or something else the Gen3 will not recognise it as an update file and the update will not be applied
5. Click Safely Remove Hardware from the system tray to safely remove the SD card from the laptop
6. Insert the SD card into the Gen3 display
7. Start the engine to power the Gen3 LMS
8. The display will boot to the update screen, wait for the update to complete and reboot
   Note: If the display did not show the update screen before booting to the main screen, then the update file has been copied or named correctly, repeat from step 2

WARNING: In Step 4 If your web browser renames the update.tar file when downloading. You must rename the file back to update.tar or THE UPDATE WILL NOT WORK.

• Related Articles

• Gen3 - Software - Telehandler and ITC Operating Systems are different

  The Gen-3 Configuration Tool can be used to Upload the Emtrion or Toradex Operating System EQSS ships the Gen 3 Display with two different Operating Systems; intended for two different and incompatible purposes. One Operating System is only used with ...

• Gen3_ITC - Software - EQSS Gen 3 Configuration Tool

  All end user capable configuration tasks are accomplished using the EQSS Gen-3 Configuration Tool The EQSS Gen-3 Configuration Tool is part of, and is automatically downloaded when the EQSS software suite is downloaded. The EQSS: Gen-3 Configuration ...

• Gen3 - Attachments - Update Existing Gen3-LMS for New Attachments

  Adding a new attachment to an existing telehandler with a Gen3-LMS system requires an update to the model configuration. To perform the update a laptop with an SD card reader and internet connection is required. The below needs to be performed ...

• Gen3 - Software - EQSS Gen3 Configuration Tool

  All end user capable configuration tasks are accomplished using the EQSS Gen3 Configuration Tool The EQSS Gen3 Configuration Tool is part of, and is automatically downloaded when the EQSS software suite is downloaded. The EQSS: Gen-3 Configuration ...

• Gen3 - Attachments - Gen 3 LMS Compatible Attachments Lists

  The Gen 3 system software already contains a large selection of instantly usable attachments for supported telehandlers As can be appreciated, the marketplace has many machine attachment manufacturers. Each of these manufacturers has available a ...